Cement residue remover

Description

Buy cement residue remover (cement residue remover, joint cleaner)

Looking to buy cement residue remover for professional use? Are you bothered by a dull haze on new tiles, uneven grout, or concrete splatters after a renovation? With our cement residue remover, you can effortlessly remove cement residue, easily remove grout residue, and even dissolve dried cement or grout without damaging your tilework. You can even tackle light rust stains right away!

This powerful cleaner is specially formulated to safely dissolve cement residue without damaging your tiles or brickwork. Perfect for quickly and effectively cleaning a floor or wall after grouting, plastering or laying bricks.

What is Cement Veil Remover used for?

Cement residue remover is designed for effectively cleaning stone and mineral surfaces after construction and renovation work. During masonry, pointing, or plastering, cement residue, mortar residue, or fine concrete specks often remain, damaging the surface’s appearance. A suitable remover dissolves these inorganic residues, effectively dissolving the material, leaving the surface clean and smooth again.

In facade cleaning, the product is used to remove cement residue and mortar residue from bricks and masonry. This helps reveal the original color and texture of the facade without mechanically damaging the surface. Cement residue remover is also a frequently used solution for cleaning floors after plastering or tiling. It makes it easier to remove stuck-on plaster residue, dried grout, and construction debris from tiles and other mineral flooring.

It is also used to remove stubborn grout and concrete residue left behind during finishing. This product helps reduce a dull haze or visible residue, particularly on tiles, concrete, and natural stone. In some cases, it is also suitable for tackling light rust stains on stone surfaces, primarily targeting superficial discoloration.

Because it focuses on mineral materials, cement residue remover is suitable for both indoor and outdoor use. It is used on bathroom tiles , patio tiles, facades, paving, and other hard surfaces where inorganic contamination has accumulated after work or due to weathering. This makes it a popular tool for professional maintenance, completion, and renovation of construction projects.

How do you use DutchChems cement veil remover?

1. Dilute the cement veil remover with water (for example 1 part product to 10 parts water for light veil, or 1 to 5 for stubborn residues).
2. Wet the surface with clean water for even application.
3. Apply the solution liberally with a mop, cloth or brush. Preferably treat max. 10–15 m² at a time.
4. Let the product work for 10-20 minutes. Keep the floor moist with the solution during the work.
5. Scrub the surface with a brush or scrubber.
6. Remove the solution with a mop and rinse thoroughly with clean water.
7. Average consumption: approx. 20–50 m² per litre, depending on dilution and the tenacity of the cement veil.

🔍 Tip: Always test on an inconspicuous area and wear protective gloves .

Storage and use

Store cement residue remover in a sealed container in a cool, dry place (15–25°C), out of reach of children. Protect from direct sunlight.

Always wear protective gloves , safety glasses , and a face mask . Ensure adequate ventilation. Always test in an inconspicuous area before applying the product to large areas. Average coverage: 20–50 m² per liter, depending on dilution and persistence.

Health and Safety

Warning

Hazard statements (H phrases)

• H319 – Causes serious eye irritation.
• H315 – Causes skin irritation.

Precautionary measures (P-phrases)

• P264: Wash thoroughly after handling this product.
• P280: Wear protective gloves, protective clothing, eye protection, face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses.
  remove if possible; continue rinsing.
• P321: Specific treatment (consult a physician with the Safety Data Sheet of this product).
• P332+P313: If skin irritation occurs: Get medical advice/attention.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P362+P364: Remove contaminated clothing and wash before reuse.

Why buy Cement Veil Remover from us?

Our cement veil remover is developed for both do-it-yourselfers and professionals in construction and renovation. Thanks to the handy packaging, you can dose in a controlled manner and work safely. We deliver quickly and reliably, with packaging that meets all legal requirements. For larger projects or special applications, we are happy to think along with you. Feel free to contact us for advice or a customized quote.

For very stubborn cement veil, a diluted solution of hydrochloric acid (for example 10% or 30%) is sometimes used. In most cases, however, a special cement veil remover is the safest and most practical choice.

• Brush cleaner – for cleaning and reusing paint brushes and rollers.
• Thinner – suitable for thinning paint and cleaning painting materials.
• White spirit – versatile solvent for degreasing and removing adhesive or grease residues.
• Wallpaper paste remover – makes removing old or stubborn wallpaper and adhesive residue easy.

👉 Want to see our complete range? Then check out our full range of solvents .