Cement film remover (1.0 L)

Buy cement residue remover (cement residue remover, joint cleaner)

Looking to buy cement residue remover for professional use? Are you bothered by a dull haze on new tiles, uneven grout, or concrete splatters after a renovation? With our cement residue remover, you can effortlessly remove cement residue, easily remove grout residue, and even dissolve dried cement or grout without damaging your tilework. You can even tackle light rust stains right away!

This powerful cleaner is specially formulated to safely dissolve cement residue without damaging your tiles or brickwork. Perfect for quickly and effectively cleaning a floor or wall after grouting, plastering or laying bricks.

What is Cement Veil Remover used for?

Cement residue remover is designed for effectively cleaning stone and mineral surfaces after construction and renovation work. During masonry, pointing, or plastering, cement residue, mortar residue, or fine concrete specks often remain, damaging the surface’s appearance. A suitable remover dissolves these inorganic residues, effectively dissolving the material, leaving the surface clean and smooth again.

In facade cleaning, the product is used to remove cement residue and mortar residue from bricks and masonry. This helps reveal the original color and texture of the facade without mechanically damaging the surface. Cement residue remover is also a frequently used solution for cleaning floors after plastering or tiling. It makes it easier to remove stuck-on plaster residue, dried grout, and construction debris from tiles and other mineral flooring.

It is also used to remove stubborn grout and concrete residue left behind during finishing. This product helps reduce a dull haze or visible residue, particularly on tiles, concrete, and natural stone. In some cases, it is also suitable for tackling light rust stains on stone surfaces, primarily targeting superficial discoloration.

Due to the focus on mineral materials, cement film remover can be used both indoors and outdoors. It is used on bathroom tiles, patio tiles, facades, paving and other hard surfaces where inorganic contamination has arisen after work or due to weather influences. This makes it a popular tool for professional maintenance, delivery and renovation of construction projects.

How do you use DutchChems cement veil remover?

1. Dilute the cement veil remover with water (for example 1 part product to 10 parts water for light veil, or 1 to 5 for stubborn residues).
2. Wet the surface with clean water for even application.
3. Apply the solution liberally with a mop, cloth or brush. Preferably treat max. 10-15 m² at a time.
4. Let the product work for 10-20 minutes. Keep the floor moist with the solution during the work.
5. Scrub the surface with a brush or scrubber.
6. Remove the solution with a mop and rinse thoroughly with clean water.
7. Average consumption: approx. 20-50 m² per litre, depending on dilution and the tenacity of the cement veil.

Tip: Always test in an inconspicuous area and wear protective gloves.

Storage and use

Store cement residue remover in a sealed container in a cool, dry place (15-25°C), out of reach of children. Protect from direct sunlight.

Always carry protective gloves, safety glasses and face mask. Ensure sufficient ventilation. Always test on an inconspicuous area before applying the product to large surfaces. Average consumption: 20–50 m² per liter, depending on dilution and persistence.

Health and Safety

Warning

Hazard statements (H-statements)

• H319 – Causes serious eye irritation.
• H315 – Causes skin irritation.

Precautionary statements (P-statements)

• P264: Wash thoroughly after handling this product.
• P280: Wear protective gloves, protective clothing, eye protection and face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses. remove if possible; continue rinsing.
• P321: Specific treatment (consult a physician with the Safety Data Sheet of this product).
• P332+P313: If skin irritation occurs: Get medical advice/attention.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P362+P364: Remove contaminated clothing and wash before reuse.

Why buy Cement Veil Remover from us?

Our cement film remover was developed for both DIY users and construction and renovation professionals. The practical packaging allows controlled dosing and safe use. We deliver quickly and reliably in packaging that meets all legal requirements. For larger projects or special applications, we are happy to help. Please contact us for advice or a custom quote.

For very stubborn cement film, a diluted solution of hydrochloric acid (e.g. 10% or 30%). In most cases, however, a special cement film remover is the safest and most practical choice.

• Brush cleaner – for cleaning and reusing paint brushes and rollers.
• Thinner– suitable for thinning paint and cleaning paint materials.
• Gasoline – versatile solvent for degreasing and removing adhesive or grease residues.
• Wallpaper glue remover – makes removing old or stubborn wallpaper and adhesive residue easy.

Would you like to see our complete range? Then check us out full range of solvents.