Agriculture & Gardening

Aquarium fertilization calculator

Healthy planted aquarium with vibrant aquatic plants and fish, optimized with NPK fertilization

Context & availability

This article is about calculating NPK nutrient salts for aquarium plants. Dutchchems only supplies technical grade potassium nitrate for industrial and laboratory applications; not for consumption, animal feed or medical purposes. The information below is for educational purposes only.

The meaning of NPK aquarium fertilization

We make aquarium fertilizer using the so-called NPK. This refers to the essential nutrients that plants need for their growth, in addition to elements such as carbon, hydrogen and oxygen. The three letters in this abbreviation stand for:

  • Nitrogen (N), supplied here as nitrate from potassium nitrate (KNO₃)
  • Phosphorus (P), supplied here as phosphate from monopotassium phosphate (KH₂PO₄)
  • Potassium (K), supplied here using potassium sulfate (K₂SO₄)

The calculator at the bottom of the page calculates how much potassium nitrate, potassium phosphate and potassium sulfate you need for your dosing bottle, based on the desired increase per dose.

Each of the above nutrients plays a crucial role in the health of the plants in your aquarium. Below we explain specifically what those roles are.

The importance of nitrogen

Nitrogen is crucial for plant development; without this nutrient they cannot grow. In addition, nitrogen stimulates the growth of bacteria in the aquarium. It is recommended to regularly supply your aquarium with nitrogen. This can be done by adding potassium nitrate to your fertilizer.

The role of phosphorus and the Redfield ratio:

The classical Redfield ratio is approximately 16:1 for nitrogen to phosphorus on a molar basis. This is not a fixed dosing ratio for every aquarium and is not directly a ratio of nitrate to phosphate in mg/L. Algae spots alone are insufficient to establish a phosphate excess. You can add extra phosphorus to your aquarium with the substance potassium phosphate.

Potassium in your aquarium fertilizer

Just like bones, potassium ensures that your aquarium plants grow strong. This substance generally does not need to be added extra because the addition of nitrogen and phosphate already provides sufficient potassium. However, if you still want to add extra potassium to your aquarium fertilizer, you can use the substance potassium sulphate .

Testing aquarium water:

It is important to test your aquarium water weekly and calculate any necessary additives using our calculation tool. It is also useful to ask for advice during meetings for aquarium enthusiasts.

How should you fertilize NPK in your aquarium?

Correctly fertilizing your aquarium with the right ratio of NPK nutrients is not complicated. You can use various test sets to measure the current concentrations. These are available in stores or online at aquarium supply stores. You don’t need to buy an advanced test kit. It’s all fairly guesswork, and you can get started and take measurements with almost any test set.

To keep track of the NPK values ​​in your aquarium, it is best to test your water quality on a fixed day a week and record these, either on paper or digitally. For all tests, pay attention to the expiration date of your test kits; It is recommended to write down the date after opening a set due to the limited shelf life. Please also note that test sets may have a small deviation, up to approximately 3.5 ppm. A drop test is often the most accurate. Don’t forget to measure the water values ​​again after every time you change the water.

Increase nitrate levels

In a well-planted aquarium, the ideal nitrate level is between 10 and 25 ppm . Suppose your goal is 20 ppm, but you only measure 5 ppm. Then the calculation of how much to add is simple:

To go from 5 ppm to 20 ppm you need to increase the level by 15 ppm.

A complete calculation example: dissolve 40.8 grams of pure potassium nitrate (KNO₃) and top up with water to 500 mL of stock solution. A 10 mL dose theoretically increases the nitrate concentration in 100 litres of aquarium water by approximately 5 mg/L. An increase of 15 mg/L requires 30 mL of the same stock solution. The calculation assumes pure salt and the net water volume; it is not a recommendation for an ideal target value. Use the final solution volume, not 500 mL of water plus the salt.

With a constant measurement of 5 ppm, you can maintain this dosage every week, provided the plants continue to grow well. Ideally, spread the dosage over several days for a more stable environment, for example by adding 10 ml on Sunday, Wednesday and Friday.

If you measure the value 0 ppm after a week, increase the dosage to 25 ppm and measure again after a few days. This may indicate the need for more frequent dosing. Also check whether your test set is still accurate by using a different brand if necessary.

Reduce excessively high nitrate levels

Too high a nitrate level can result from overfeeding, too high a fish stock, insufficient plant growth or insufficient water renewal. In such cases, changing the water is the only solution. This is especially important in aquariums with large fish such as cichlids, where high nitrate levels are more common.

By following the guidelines in this article, you will ensure optimal growth and health of your aquarium plants, while also maintaining a healthy environment for your fish.

Enter your aquarium and dosing bottle volumes, the dose and the desired increases in nitrate, phosphate and potassium below. The calculator calculates the three salt amounts, taking into account the potassium already supplied by potassium nitrate and potassium phosphate.

Calculate a stock solution

Aquarium fertilization calculator

Calculate the required amounts of all three nutrient salts. Results update automatically.

L
The actual water volume, excluding substrate and decorations.
mL
The amount of solution you are making. After dissolving, top up to this total volume.
mL
ppm
ppm
ppm

Use pure salts and check that everything dissolves completely.

Potassium from potassium nitrate and potassium phosphate is included. If they already supply enough potassium, no additional potassium sulfate is needed.

Use a decimal point or comma, without thousands separators.